uPVC Front Door Cost: 2026 UK Price Guide

uPVC front door cost typically ranges from £250–£850 supply-only, or £450–£1,500 fully fitted, with most Buckinghamshire and Oxfordshire homeowners paying £600–£1,200 for a standard replacement including installation. Size, glazing, and frame condition are the main factors that move the price beyond that baseline.

If you’ve had a quote already, you’ve probably noticed the figure sits somewhere in a fairly wide range rather than a fixed price. That’s normal; uPVC front door cost depends on more variables than most people expect going in, from door width and glazing style to whether the existing frame can be reused.

Based on Bifold-Doors.com’s experience fitting doors across Buckinghamshire and Oxfordshire, from period cottages near Thame to new-build estates around Bicester, the detail that trips up most first-time buyers isn’t the door price itself. It’s whether the quote includes frame replacement, and whether the fitter is in-house or subcontracted.

This guide provides the uPVC front door cost properly: supply-only versus fully fitted, installation timeframes, and how uPVC actually compares to composite once you look past the headline price.

How Much Does a uPVC Front Door Cost?

A uPVC front door costs £250–£850 supply-only, or £450–£1,500 fully fitted, with most homeowners paying £600–£1,200 for a standard specification. uPVC remains the lower-cost route compared with composite, which is part of why it’s still the most common front door material fitted across the UK. Get in touch for a personalised price on your own door, no pressure, no obligation, just an honest number.

Average uPVC Front Door Price Range

Basic, off-the-shelf sized doors with standard glazing sit at the bottom of that range. Made-to-measure doors, decorative glazing, or a bespoke colour push the price toward £1,500, even while staying within uPVC rather than moving to composite.

uPVC Door Cost by Style and Size

Style/Size	Supply-Only	Fully Fitted
Standard size, plain glazing	£250–£450	£450–£750
Standard size, decorative glazing	£450–£650	£700–£1,000
Made-to-measure or wider opening	£650–£850	£1,100–£1,500

Supply-Only vs Supply-and-Fit Pricing

Supply-only saves you roughly 40% of the total, but you’re responsible for old-door removal, frame fitting, and weatherproofing, or paying a separate tradesperson for it. Our uPVC front doors range is available either way, though supply-and-fit is the option most first-time buyers choose, since it puts the whole job under one warranty.

How Much Should It Cost to Install a New Front Door?

Installation alone typically costs £300–£500 on top of the door price, rising to £600–£800 where the existing frame needs replacing rather than reusing. Frame condition, more than door size, is what usually decides where you land in that range.

Average Installation Cost Breakdown

A standard like-for-like fit, same size opening, reusable frame, is the cheapest and quickest scenario. Widening an opening, fitting a new lintel, or making good brickwork around an older frame all add labour time and cost.

Labour Costs by UK Region

Buckinghamshire and Oxfordshire both sit within the South East, where labour rates typically run slightly above the UK average. Here’s the part most first-time buyers get wrong: assuming a quote from a national comparison site reflects local pricing, it rarely does once you factor in South East labour rates and local access conditions.

What a Full Installation Quote Should Include

• Removal and disposal of the existing door and any wall making-good
• Fitting the new door, frame, and hardware
• Weathersealing around the new opening
• A FENSA certificate confirming Building Regulations compliance

How Much Does It Cost to Replace a uPVC Front Door?

Replacing a uPVC front door costs £450–£1,500 fully fitted in most cases, though this rises where the frame itself needs replacing rather than just the door slab. Door-only replacement is cheaper and faster, but only works if the existing frame is still sound.

Replacing the Door Only vs Door + Frame

A door-only swap, reusing the existing frame, typically saves £200–£400 against a full door-and-frame replacement. That’s the short answer. The longer answer is what actually determines your final price: whether the frame has warped, dropped, or lost its weatherseal integrity, something only a survey visit can confirm properly.

Additional Replacement Costs

Budget separately for brickwork repair around an older opening, disposal of the old door and frame, and any letterbox or spyhole relocation if your new door’s dimensions differ slightly from the old one.

Signs You Need a Full Replacement vs Repair

• Draughts around the frame that persist after reseating the hinges
• Visible warping or a door that no longer closes flush
• A frame that’s dropped, causing the multi-point lock to bind

How Long Does It Take to Fit a New uPVC Front Door?

A standard uPVC front door installation typically takes 2–4 hours for a straightforward, like-for-like replacement, extending to a full day if structural work is needed or if you’re tackling it as a DIY project. Most professional, like-for-like jobs on new-build or 1930s properties finish within a single half-day visit.

Typical Installation Timeframes

A homeowner on a Bicester new-build estate replacing a standard-sized door with a reusable frame can generally expect a fit within 2–4 hours. A period property near Woodstock, where the frame needs full replacement and brickwork making good, often takes closer to a full day.

Factors That Extend Fitting Time

Structural widening, an uneven or settled frame, and weather-dependent sealing work (fitting in driving rain isn’t ideal for a lasting seal) can all push a straightforward job into a longer one. Scheduling around a wet spell is a genuine, if unglamorous, part of UK installation planning.

Which Is Cheaper: uPVC or Composite Front Doors?

Price Comparison Table

Factor	uPVC	Composite
Typical fully fitted cost	£450–£1,500	£700–£2,500+
Typical lifespan	20–30 years, up to 35 with a quality install	30–35 years
Security	Good, multi-point locking standard	Strong, solid or foam core reinforced
Maintenance	Low, can discolour over time	Low, doesn’t need repainting

If composite pricing is what you’re actually comparing against, our separate composite door cost guide breaks that down in the same level of detail as this one.

Long-Term Value: Lifespan, Maintenance and Durability

For homeowners planning to stay in their property long-term, composite doors can offer better value despite their higher upfront cost. They provide excellent security, thermal insulation and weather resistance with minimal maintenance.

Leading UK composite door ranges, including Solidor, Rockdoor and Endurance, typically start from around £700 fully fitted, depending on the specification and installation requirements.

However, neither uPVC nor composite is universally better. The right choice depends on your budget, expected lifespan, security needs and how long you plan to stay in the property.

What Is the Best Front Door to Buy in the UK?

There’s no single best front door; the right material depends on your budget, property type, and how long you’re planning to stay. uPVC suits budget-led replacements; composite suits long-term security and insulation; timber suits period and listed properties; aluminium suits modern extensions more than standalone front doors.

uPVC vs Composite vs Aluminium

Material	Typical Cost	Best Suited To
uPVC	£450–£1,500	Budget-led replacements, rental properties
Timber	£1,200–£3,000+	Period and listed properties, heritage character
Aluminium	Higher, size-dependent	Modern extensions, wide openings

if your property is listed or sits in a conservation area, parts of central Oxford and Woodstock among them, a heritage-appropriate composite finish may be required rather than uPVC, regardless of budget. Confirm with your local planning department before ordering.

If your project is actually a rear extension rather than a front door, our aluminium bifold doors range is a better comparison point than any of the front-door materials above.

What Affects the Cost of a New Front Door?

Material choice, size, glazing, colour, hardware, and location are the six factors that move front door cost the most. Material and size drive the base price; glazing and colour usually decide where within that range you land. 

Across all materials, budget-friendly uPVC through to sturdy composite and premium timber, a new front door fully installed can run anywhere from £850 to £3,500, which is why narrowing down material first makes the rest of the decision far easier.

• Material choice: uPVC costs the least, composite and timber more, aluminium generally reserved for wider openings
• Size and configuration: made-to-measure and wider doors cost more than standard off-the-shelf sizes
• Glazing and glass type: decorative or bespoke-pattern glass adds noticeably more than standard clear or frosted panels
• Colour and finish: standard white or woodgrain finishes cost less than bespoke or dual-colour options
• Hardware and locking systems: anti-snap cylinders and upgraded handles add a modest amount but improve security meaningfully
• Location in the UK: South East labour rates, including Buckinghamshire and Oxfordshire, typically run above the national average

Front Door Standards and Building Regulations

Front door replacements must meet Building Regulations Part L for thermal performance, and installers can self-certify compliance through a competent person scheme rather than requiring a separate council inspection. This is what FENSA registration actually checks: not the door’s quality, but that the installation itself meets current Building Regulations.

Security Standards

Look for PAS 24 certification and, where relevant, Secured by Design accreditation; both indicate the door set has been tested against forced-entry methods, not just quoted as “secure” by the seller.

Lock Standards

A door meeting BS 3621 or fitted with a TS 007 3-star rated cylinder offers meaningfully better resistance to snapping than a standard, uncertified lock, worth asking about specifically rather than assuming “multi-point locking” alone covers it.

Installer Accreditations

Ask to see your installer’s FENSA registration before signing. FENSA certification confirms the installer can self-certify Building Regulations compliance; that’s what separates a certified installer from an uninsured one working outside the scheme. 

Commercial premises across Buckinghamshire and Oxfordshire follow a slightly different compliance route; our aluminium commercial doors page covers that separately.

How to Get the Best Price on a New uPVC Front Door

The most reliable way to get a comparable price is a site survey, since online ranges can’t account for your specific frame condition or access. A like-for-like quote comparison only works if every installer has priced against the same specification.

What to Include in a Quote Comparison

Check that every quote states glazing type, whether frame replacement is included, and the guarantee period; headline prices that omit any of these aren’t genuinely comparable, even if the numbers look close.

Questions to Ask an Installer

• Is your team in-house, or is fitting subcontracted?
• Does the quote assume the existing frame is reusable?
• What’s included in the guarantee, and is it insurance-backed?

Getting an Accurate uPVC Front Door Cost for Your Home

Online ranges are a starting point only; your uPVC front door cost depends on frame condition, size, and access enough that a site survey is the only way to get a genuinely comparable figure. If a straightforward replacement on a new-build near Bicester or a period fit near Thame sounds like your project, checking current survey availability costs nothing and commits you to nothing.

Our team covers Buckinghamshire, Oxfordshire, and the surrounding home counties, fitted by our own in-house installers rather than subcontracted crews. No pressure, no obligation, just an honest number for your door and a realistic timeline before you decide anything.